TYPE – SnapTop – Type KB
Channel Size – 20mm x 5mm
Overall Dimensions – 60mm x 10mm x 9000mm
Legacy p/n: 10060070
Only available in GREY.
Vulcascot’s distinctive Snap Top profiles will carry awkward, small diameter telecommunications cables around the skirting, across the floor and up and around the workstation.
Simply “snap” open, push in the cables, apply foam fixing tape to the rebate in the base and fit in position for a neat flush finish.
Profiles available in 9m lengths and colour grey.
- Fire tested to BS 476 Part 7 Class 3.
- Halogen free in the event of fire
- Low smoke, non toxic and low fume emission levels
- Tested for non conductivity to BS903-C5, 500V
- All dimensions are nominal and subject to manufacturing tolerances
Note – These ramps are temporary deployment and not for permanent fitting. The ramp should be deployed on firm ground, ideally concrete or tarmac. Avoid bridging over voids as this could cause the ramp to fail.
Important: Signage should be in place to slow traffic down (max. 5 mph) whilst traversing the ramp. Not suitable for forklifts.
Please Note – Our Vulcascot products are delivered direct from the manufacturer. Orders placed before 12:30pm will normally be shipped the same day, for next day delivery.
Orders received after 12:30pm will be processed the following day.