TYPE – SNAP FIT – TYPE MCP/1
Channel Size – 23mm x 13mm Channel with 2 side apertures
Overall Dimensions – 83mm x 20mm x 9000mm
Legacy p/n: 10060080
Available in BLACK or GREY (* you will be sent BLACK unless another option is specified)
Designed to protect data, phone and electrical cables up to 16mm in spacious compartments.
In addition to the Snap Fit membrane in the base, the MCP profiles have a unique ridged, anti slip top section.
The BNC profiles have been designed to allow power and data to lay in parallel with a semi rigid separator running the length of the profile preventing electromagnetic interference.
- Fire tested to BS 476 Part 7 Class 3
- Halogen free in the event of fire
- Low smoke, non toxic and low fume emission levels
- Tested for non conductivity to BS903-C5, 500V
- UV stabilised for extended outdoor life
- All dimensions are nominal and subject to manufacturing tolerances
Note – These ramps are temporary deployment and not for permanent fitting. The ramp should be deployed on firm ground, ideally concrete or tarmac. Avoid bridging over voids as this could cause the ramp to fail.
Important: Signage should be in place to slow traffic down (max. 5 mph) whilst traversing the ramp. Not suitable for forklifts.
Please Note – Our Vulcascot products are delivered direct from the manufacturer. Orders placed before 12:30pm will normally be shipped the same day, for next day delivery.
Orders received after 12:30pm will be processed the following day.